How do I clip a cordless honeycomb blind into its brackets, and remove it again?

To release a cordless honeycomb (cellular) blind, push into the mechanism at the base of the bracket to un-pop the headrail from the casing. To remove it for painting, reverse the install: un-pop the headrail and lift the blind out.

1. 1

   Find the release

   Locate the release point at the base of each recess bracket.

2. 2

   Un-pop the headrail

   Push into the release to free the headrail; tilt a wide flat-head screwdriver if it resists.

3. 3

   Lift out

   Once both brackets release, lift the headrail clear to remove the blind for painting.

4. 4

   Refit

   Reverse the steps, seating the headrail back into both brackets until it clicks.