How do I put a wand runner back into my curtain track?
You can reinsert a wand runner yourself with a Phillips head screwdriver: remove the end cap, slide the wand runner in between the first and second runner on the string, then refit the end cap. It takes a couple of minutes.
-
1
Remove the end cap
Use a Phillips head screwdriver to unscrew the end cap, then slide out the first runner on the string of runners.
-
2
Slide the wand runner in
Feed the wand runner into the track so it sits between the first and second runner on the string, in the same order as the rest.
-
3
Refit the end cap
Slide the first runner back in, then re-screw the end cap so the runners cannot slide off the end again.
-
4
If it keeps coming free
If the wand runner keeps popping out after refitting, the track itself may be at fault. Contact our team and we can arrange a replacement track piece.
