How do I fix curtain track brackets into brick or masonry?

Drill 6mm pilot holes about 35mm deep, insert 8G 6mm wall plugs, then fix the brackets with the supplied screws.

1. 1

   Mark your bracket positions

   Hold each bracket where the track will sit and mark the screw holes level on the wall.

2. 2

   Drill the pilot holes

   Drill 6mm pilot holes about 35mm deep with a masonry bit at each mark.

3. 3

   Insert the wall plugs

   Push an 8G 6mm wall plug into each hole until it sits flush with the surface.

4. 4

   Fix the brackets

   Screw the brackets to the wall using the supplied screws, tightening until they are firm.