How to install cordless Cellular blinds

Before commencing, verify the correct fitting position using your order summary. A face fit blind will sit on the outside frame or architrave of your window.

1. Install the mounting brackets

The mounting brackets should be fixed approximately 50mm from each end (left and right) of the blind’s headrail. For blinds exceeding 1200mm width, an additional bracket should be positioned centrally for support.

2. Attach the headrail

Position the front edge of the headrail into the front hook of the mounting bracket. Then, gently push the headrail towards the window until it “snaps” into position.

Please note, if required for repositioning, you can remove the headrail by inserting a screwdriver into the mechanism to release the rail from the bracket.

3. Attach the handle

Clip the handle onto the base of the blind’s bottom rail in a central position.

4. Install the hold down clips

If ordered, attach the base of the hold down clip to the window recess or sill. Additional fixing is possible through the side of the bracket (when suitable). Once attached, snap the hold down clip pin into the guide hole found on the end of the blind’s bottom rail.